TECHNICAL SPECIFICATIONS
SUPPLY VOLTAGE |
380 V /50Hz |
PRIMARY POWER |
10,7 KVA |
OPEN CIRCUIT VOLTAGE |
72 V |
SETTING RANGE |
5 - 320 A |
WELDING CURRENT AT |
%60 - 320 A |
SUPPLY VOLTAGE |
380 V /50Hz |
PRIMARY POWER |
10,7 KVA |
OPEN CIRCUIT VOLTAGE |
72 V |
SETTING RANGE |
5 - 320 A |
WELDING CURRENT AT |
%60 - 320 A |
PROTECTION CLASS |
IP 21 S |
DIMENSIONS (WXLXH mm) |
470x1020x1070 mm |
WEIGHT (KG) |
68 KG |
TORCH |
4 mt |
GROUND CABLE |
3 mt |
MAIN CABLE |
4 mt |
Usage Area:
INV DC P-TIG 320 AS is a 100% made in Turkey.
INVERTER PULSE TIG WELDING MACHINE provides up to 50% energy saving.
TIG welding can be used with all metals except aluminum and magnesium alloy metals.
It is a touch-panel INVERTER DC P-TIG welding machine comes with digital volt-ammeter indication
INVERTER DC P-TIG allows to start with pilot arc (HF).
At the same time, focusing the welding arc on a narrow area on workpiece prevent electric shocks possibility of reduce to minimum.
INV DC TIG 320 AS is used all Rutile, Basic and Cellulosic electrodes between 2.5 mm and 5.0 mm and light and portable.
Duty cycle is 60% at 320A.
INV DC P-TIG 320 A is used heavy industry, boiler, tank, trailer, pipe, steel contraction, maintenance-repair and filling welding, assembly works, in-situ manufacturing.
It is suitable to work with generator
General Features:
*Operating voltage 3X380 V - 50 Hz.
* VDR feature, cuts welding current when not welding, ensuring safer machine operation and security against electrical shock.
* Multifunctional digital display allows user select the desired operations such as 2T, 4T, GAS TEST, TIG and MMA (Electrode), pre-gas, upslope-downslope, high current, low current, post gas set and pulse frequency and pulse length . At the same time, there are three different memory modes in which custom parameters can be saved.
* INV DC TIG 320 AS protects itself in case of failure such as phase short circuit, over temperature, phase break in mains or input supply line during operation, voltage increase or drop during operation and stops the operation by writing fault code on the digital screen.
* Suitable for working with generator.
* Torch cable is water cooled.
* Suitable for working with generator.
* Water pressure-flow sensor is available.
* Ampere value input from digital screen before welding, thanks to the ampere tracking system keeps the output current constant regardless of the used electrode diameter.
* IP 21 S is designed to meet TSE EN 60974-1, EN 60974-10 and CE safety standards.
Standard Accessories:
* Torch Cable WP18(4 m)
* Ground cable (3 m)
